I'd imagine this holster would work

https://www.galcogunleather.com/yaqui-slide-belt-holster_8_4_1343.html

Otherwise you're probably looking at a custom holster for the immediate future I'd imagine

Sent from my SM-G900P using Tapatalk

 

I tried a Yaqui Slide in the store the other day that was listed for a Sig P220. The 10mm version is way bigger width/thickness wise. It is amazing how much the 10mm version is "beefed up" compared to the .45 ACP version. It is such a difference that honestly Im surprised they still call it a P220.

I tried it in almost every holster the LGS had even Springfield, Sig, Colt, S&W, holsters. There docent seem to be ANY guns of this size or build. This thing will not fit in a single holster that I have found anywhere and to be honest, it won't even start in to most of them the first inch or two of the barrel/slide.

 

I wonder if the knife would scratch the slide in the yaqui holster picture? I realize this is just a modeled shot but I think I would be concerned about the little brass nub found on the side of my Levi's or anything else scratching my gun. I don't baby them but I try to be careful all the same. The P220 Elite I just bought cost more than my first car.


Sent from my iPad using Tapatalk

 

I guess it would all depends on what position you decided to wear the holster.....I would think that you'd be ok if it were between 3-4 o'clock yes?

I COMPLETELY understand the concern!!

 

If a leather got close, real hot water will help reform it.

Nothing like carrying a holizer.
Makes my 938 seem downright puny.

 

galco avenger

 

I doubt you are going to find anything to fit it like you want. There just hasn't been a market for it. You should be able to find a cheap, large nylon holster (like an Uncle Mike's, maybe), but that is about it.

But now that you mention it...you've heard of "bikini holsters"? It might fight some full-size Kydex holsters with 1" or so of the muzzle sticking out the bottom like a semi-auto does in "bikini holsters". I need to test that with mine. I've never liked "bikini holsters" due to the lack of protection for the front sight, but there seems to be a market for them.

Anyway, that's my thoughts for the moment. :huh:

 

Hi Sniper, I feel your pain. I too visited a few of my LGS' and not any holster would fit. I am waiting for a local leather holster maker to have time to see what I have and help me figure out what will work for me and make it. I am expecting sometime in September at this point for a custom made leather holster. I will say though, the plastic LVL 1 holster that came with my SP2022 9mm does fit the P220 10mm. Although I am NOT a fan of using it for very long.

 

I have a Milt Sparks VM II that is leather, for my 220 compact. I bought the one for a full 220.
Last night, I tried my 220-10mm SSS-SAO and it fits very nicely.
Leather has a lot of natural give.
I find it also fits my 220-9mm and my 229 rail.

 

Not perfect, but with a little more working, could get there.

 

Sig 220 10mm holster

The Bianchi M12 with the shoulder holster option works fine with the Sig 220 10mm. KT

Model M12 Universal Military Holster - The Safariland Group

 

We plead the 2nd : wepleadthe2nd.com is making Kydex for the P220 10MM

 

DeSantis mini belt slide OWB. Got one for mine and it fits great.

 

Sig P220 10mm SAO Holster

My P220 10mm works in my Uncle Mikes reflex holster for my standard P220. The slide extends about an 1/2" out but the draw and fit otherwise is perfect.

 

Crossbreed holsters will work, they are $70 roughly.

 

I wonder if OP found a holster yet, been over a year. By now a nice one could have been made, like mine, a horsehide Kramer scabbard.

 

GREAT ALASKAN SHOULDER SYSTEM: Galco Hunting Holsters at Galco

Either of the Glock choices fit well with a little break in.

 

My new P220 10mm fits pefectly in my old Bianchi X15 size medium shoulder holster for my Smith&Wesson 4506/1006. I'm not sure who sells them now, but any 4506 holster should be close.

 

Here's the one that I have that fits my 5" barrel P220 size medium, it's $99.99 on Amazon. Mines 20+ years old and still going strong. I can post a picture if anyones interested.
https://www.amazon.com/Bianchi-X15-Shoulder-Holster-Tan/dp/B0051HATOO?th=1&psc=1

 

Galco Combat Master fits and works perfectly. Used this same holster for my P226 X-Five Comp - same model, CM248, fits both P226 and P220 pistols.

 

Had the same problem with a 5 inch Sig Scorpion 1911. It's a big gun. Ended up with a leather pancake OWB Glock 34 holster. Fit like a glove. I think it was a DeSantis, but may be worth checking out.

 

I had a buddy of mine make me one. I love it. I also use it for my 220 Dark Elite and my 226.

 

Wow! I had to do a double-take there to make sure that wasn't really woven! He did a great job!

 

I want one for range use; nothing fancy.

I'm thinking of giving this Bianchi Model 7001 made for the P220 Match (a 5" P220) a try.

There are a bunch of different Model 7001 holsters. You have to go through the weapon selection for the P220 Match. The right-hand model is SKU: 1014355, Part: 24270.
$42.00.

I believe that it should work.

I had a similar one a long time ago for another gun and they are made well. Should make a good holster for the woods too.

The link below takes you to the page for the P220 Match version and you select right or left hand.

Model 7001 Hip Holster with Thumbsnap Closure - The Safariland Group

Here is a pic of "a 7001" for the Beretta.

 

Try Diamond D. I have a Guides Choice for my Ruger Toklat and have one on order for myP220 10mm. Link is below.

https://www.diamonddcustomleather.com/collections/holsters/products/hh12

 

My 220 10 mm DA/Sa fits my 229 holsters. So does my 224.

Sent from my SM-G935P using Tapatalk

 

Not that you are looking for a Kydex... But there is a good reason I use Bladetech... "If we make it it will be ready in 3 to 4 weeks... If we do not it will be 4 to 6 weeks..." They built their reputation on making holsters for anything... I don't use anything else... They also make custom sheaths for knives... That reminds me... I have to call a bout of few of those... I'll be back later on... LOL...

 

Not sure which holster will fit P220 5" barrel with Vortex Vemon. It will be hunting and camping. I might like to have one for shoulder and one for OWB or IWB.

Any suggest?

Thanks!

 

Get a custom one made, Kramer, Milt Sparks etc.