Holosun 507 for CZ 75 SP-01

MMH · Apr 7, 2023

I want to get an optic for my SP-01 Tactical. The SP-01 is a suppressor ready model w/ threaded barrel & suppressor height sights. I want to keep the sights to use as witness sights. The distance from the front of the rear sight to edge of the ejection port is 1.9" The 507C has a length of 1.78" The 507K has a length of 1.60". I like the 507C because it has a larger screen but it may be too big. I should be able to get the slide milled so that the sights are barely below the aiming dot.

I have not had any of my slides milled for optics and need some advice!

PacNWviking · Apr 7, 2023

When it comes to CZ Cajun gun works or CZ custom seem to be the go to for this. Might try giving them a call and working it out with one of them to see if they can accommodate what your looking for or what options they have.

Link to Cajun: https://cajungunworks.com/milling-optics/optic-milling/

Looking at the pictures of the rmr with buis, it seems possible but not with the factory sights. Perhaps might have to look at doing with for the 507k footprint.

Philipl · Apr 8, 2023

I have dealt with both and both are excellent but Cajun Gun Works is my favorite. I have spent a bit over $7,500 with them over the years. Their work and products are great!

Holosun 507 for CZ 75 SP-01

Our Vendors

Top Contributors this Month

Recommended Communities