[Fletch]

I had a first gen 365 now long since sold but recently picked up a 365XL and the only thing I can be critical of is the trigger sounds like a squeaky sneaker when pulled (dry fire, not gotten to get to the range yet).

Considering pulling out the FCU possibly taking it apart and greasing it up to see if that helps but curious if its just a normal 365 thing.

 

[ffearless]

Not usual. I would use a dry lube so it won't attract dust and grit.

 

[donh]

squeaky trigger

Where does the squeak begin? If the squeak occurs just before the shot breaks, give special attention to the striker safety block/trigger interface. This was a bad spot in the trigger pull on my XL.

 

[Fletch]

Where does the squeak begin? If the squeak occurs just before the shot breaks, give special attention to the striker safety block/trigger interface. This was a bad spot in the trigger pull on my XL.

During take up, Id say almost immediate.

 

[donh]

Squeaky trigger

During take up, Id say almost immediate.

There is an article on smoothing trigger pull in the sticky,s section

 

[Fletch]

Update, found the squeaky culprit it was the trigger return spring. Drop of oil and she's nice and quiet (probably use a little grease next time).

 

[Argee]

Update, found the squeaky culprit it was the trigger return spring. Drop of oil and she's nice and quiet (probably use a little grease next time).

Good for you...you found the annoying culprit!