SIG Talk banner

Sig P250 slide problem

2633 Views 6 Replies 5 Participants Last post by  Cheap Shot
I have a sig P250C 9mm and just purchased a P250F 40 S&W xchange kit used . The slide assembly won't engage on the frame I changed the barrel,slide spring ,and guide. Still no go. The P250C slide will work on the full frame. Any help ?
1 - 7 of 7 Posts

· Registered
Joined
·
6 Posts
Slide Return

I bet he has the same problem I had a couple of weeks ago (4/10/2017) on the forum. He needs to push down the silver bar sticking up.

See my post of two weeks ago for the pictures and picture solution.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #6 ·
The p250 FCU is not the same as the P320 .There is nothing to push down . the 9mm compact slide assembly works fine on the full size frame. It will lock properly. The slide spring and guide rod on the 40 are hitting on the FCU and won't allow the slide to retract
 

· Registered
Joined
·
369 Posts
Will the 40 upper assemble onto the C grip?

Can you push down on the front of the guiderod when the slide won't move any more?

Will the slide go on without the barrel and guiderod?

Can you include some pictures of the parts and where the lockup occurs?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top