[kernt]

I'm thinking about adding the Romeo 01 optic to my Tacops 320CA. The pistol already has the tall sights and from what I can tell the slide and barrel are identical to the 320 Compact so I'm assuming fitting should not be a problem.
I'd like to have the slide milled to accept the Romeo like the RX models.
Can anyone suggest a shop that could perform the milling, adding the Nitron finish to the newly exposed stainless steel, and securely mounting the optics?

Thanks in advance.

 

[steved13]

There are a lot of shops out there.

I've heard good things about these

https://suarezinternational.com/

Bowie Tactical Concepts Contact and Links

I had a slide milled by these guys...good work

https://gallowayprecision.com

They all may need the Romeo for the footprint.

 

[hardluk1]

Might want to have it milled so you use a m&p base kit that allows for other optics ?

 

[Scooter22]

One thing you need to be aware of is the fact that the Romeo one and the slide on the 320 RX are dovetailed just like rear sights. It's not a straight vertical cut at the front and rear where it mounts.


Sent from my iPhone using Tapatalk Pro

 

[RhysARoni]

If you are in the area, Wisconsin tactical did my 320c. I did the stippling but they did everything else. They milled the slide for the rmr, they squared off and deepened my front cocking serrations. Cerakoted my slide and frame and light. And installed siglight supressor sights. (Before and after )

 

[A1Evilboy]

I built my own. I bought a 320 RXc then ordered the threaded barrel, 21rd mags and a carry grip module. Now I have a P320 Tacops RX


Sent from my iPhone using Tapatalk