SIG Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
The safety works and is tight on the left side but loose and rattles on the right side. Came back from the factory this way after cleaning and repair. Is this a quick fix?
 

·
Registered
Joined
·
11,536 Posts
The left side safety lever is moulded as part of the safety shaft; if it's loose then there is a real problem and the pistol should be deadlined. Never heard of one failing.

The right side safety lever attaches to the safety shaft using a type of bayonet mount and it will never be as tight as the left side lever. If the bayonet mount on the right side lever gets stretched open any during removal or installation it will rattle. Not so much an operational problem as it is an annoyance.

The only fix I would attempt is replacing the right side safety lever.
 
1 - 3 of 3 Posts
Top