SIG Talk banner

1 - 8 of 8 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
From the owner's manual:

MAGAZINE
1. Wipe the magazine tube and follower with a cloth. Clean the magazine tube
and follower with a soft brush and CLP.
2. Use a cloth to clean the magazine spring, floorplate, and base plate.
3. Apply a light coat of CLP/LSA to the spring and magazine tube.
Do I follow these instructions? Does the "magazine tube" mean inside or outside? Thanks
 

·
Registered
Joined
·
823 Posts
3. Apply a light coat of CLP/LSA to the spring and magazine tube.

I think that means the inside of the magazine tube body.

A VERY light coating. Not enough to migrate to the ammo.
 

·
Registered
Joined
·
183 Posts
My brother used to lube his magazines...


















































it made the pages stick together... :rolleyes:
 

·
Registered
Joined
·
905 Posts
I'd rather have a light coating of preservative on the inside and outside surfaces of the mag, than a light coating of corrosion.
 
1 - 8 of 8 Posts
Top