SIG Talk banner

41 - 46 of 46 Posts

·
Registered
Joined
·
132 Posts
I've installed a SRT and a dual adjustable trigger in my P220 and P220R. and there is a world of difference. in the full size 220 I put a Grayguns trigger and fat guide rod, in the 220R compact I installed a Armory Craf flat trigger
 

·
Registered
Joined
·
86 Posts
Installed a SRT kit into a P220, at the same time I also installed a 18lb wolff reduced hammer spring, both make a huge difference and well worth the effort, plenty of helpful YT videos for installation, had no light strikes with the 18lb spring
 

·
Registered
Joined
·
121 Posts
There is another way.... Make sure you have an empty and safe gun!!!

Pull the trigger and hold it down...
rack the slide...
release the trigger slowly...
if the reset click is almost instantly...it's an SRT

if it creeps along until it resets, it isn't.
What if it resets almost instantly 19 times out of 20, but goes out to full resting single action randomly sometimes before I get that CLICK (rarely)??

Do I just have a broken one lol ?? >_<

I know for sure I have the SRT on this 224, just not sure whats going on with mine :confused:


I am pulling the trigger, holding it back, racking the slide and then slowly releasing the trigger.... 19 out of 20 times it resets in 1/10th of an inch amazingly short.... then that random one time it will go all the way out to single action before resetting O_O
 
41 - 46 of 46 Posts
Top