SIG Talk banner


  1. Which height front sight does the X-Carry use?

    P250, P320, & P320 X-5 Pistols
    I picked up a X-Carry slide, but it is missing the front sight. What height front sight does the X-Carry with the optics plate come with, 6 or 8? I've decided I'm changing my M18 into a X-Carry and I've like the X-Carry grip much better. Unfortunately, the X-Carry slide I got is missing the...
  2. #6 vs #8 front and rear XRays on 320C

    P250, P320, & P320 X-5 Pistols
    Hey - I am interested in getting Sig Sauer X-Ray3 Day/Night Sight Set for my new P320C. I'm trying to figure out what size I should get a going a little crazy trying to figure it out. My 320C came with a #6 front and a #8 rear. I don't see that I am consistently high or low with this gun, in...
  3. Front sight dovetail differences between P320 slides?

    P250, P320, & P320 X-5 Pistols
    I recently ordered a Dawson front sight for my P320 X-Full slide in .400" height, as I'm mounting a DPP. On the Dawson site, it lists two different SKU's for Standard vs Compact slides (even with the same .400" height). I ordered this one...
  4. #8 front and Rear, recomendations for P220

    SIG Sauer Pistols
    I'm finding it a bit of a challenge finding P220 compatible #8 front and #8 rear sight (night sights). I've looked at Trijicon (as an example) but they say nothing about Sig sight numbers. Maybe a better place to look for pistol sights sites that are more informative?
  5. Siglight Night Sights

    P250, P320, & P320 X-5 Pistols
    Hello all, Was checking for some price drops on a website I go to a lot and noticed that the full size 320 nitron with siglight night sights is $135 more than the 320 without the siglight night sights. Do you think the price increase is worth it? Do you think having the siglight night sight is...
  6. P232 sights

    SIG Sauer Pistols
    Hi I’m new here, just wondering... read a bit but need new advice. I just bought a 232. Tritium sights are dead. Any good solutions? Thx, cz
  7. P229 SIGLITE are they broken/alternatives?

    SIG Sauer Pistols
    I picked up - my first firearm - a P229 Nitron 9mm 15+1 E29R-9-BSS. I've been going to the range a lot to get proficient with it. It is an indoor range and light is not great - to my novice opinion - at the shooting booth. I've noticed the front sight not bein as visible as the rear ones...
  8. Sig Sauer Nightmare 1911. Sight help please

    1911 Pistols
    I recently purchased a Sig Nightmare 1911 in 45. It came with the factory Novak Sig Sights but they are a bit hazy so I'm looking to replace them. I was looking on Amazon and found TFO Novak sights however they are asking me for a "style name" which Im assuming means size but truthfully am...
  9. Red Dot Sights That Fit P320 X-Compact

    P250, P320, & P320 X-5 Pistols
    At this point, the only red dot sight that fits the X-Compact is the Delta Point Pro, since the Romeo 1 Pro and Romeo 2 have not been released. Are there any other options at this point, such as sights that have the same base at the DPP?
  10. P320 C 45 acp sight #s

    P250, P320, & P320 X-5 Pistols
    I've seen some talk on variations of sight # across the P320 calibers. Looking to upgrade soon, as Im not the biggest fan of the sig lite night sights, usually shoot in a covered area and the white goes grey and is hard to get a good sight picture. And sig's recommendation/ specs dont seem...
  11. ACCESSORIES for .45 ACP P320 Compact

    P250, P320, & P320 X-5 Pistols
  12. Dawson sights for WG P226

    SIG Sauer Pistols
    I was hoping to put a set of Dawson Comp sights on my West German P226. I was a little confused on the website and also it looked like they only offered the front site. I called and talked to someone about it. They were not sure the new P226 sights would fit the dovetail correctly and had me...
  13. P229 legion Sight Picture

    SIG Sauer Pistols
    Hello Everyone. I have a P229 legion and I know SIG sight picture is set for Combat. I have a number 6 front sight and a number 8 rear sight. Does anyone know what I need to change to get a sight picture of 6"o'clock like I was train to shoot with. Does anyone know of a good sight pusher that...
  14. Sig SIGLITE fixed dovetail sights Numbering

    SIG Sauer Pistols
    Greetings, For the life of me, I couldn't remember what are the standard sights on a SIG, specifically, the classic line P series such as the P226. If I remember correctly, it was either a #6 #8 or a #8 #8 for the front and rear sights respectively as these are the only sets I saw for...
  15. RX - P226 or P229? Which to get?

    Hi All, I've been a Sig guy for nearly 2 years now, and I've been shooting a lot ever since. I have a P229 Legion and a P226/MK26. Love 'em both. I'm thinking of getting another Sig with a Romeo electro-optic sight. I guess I've got the Signess pretty bad. I'm not sure which to get, so I'd...
  16. P 239 Sights

    P250, P320, & P320 X-5 Pistols
    I have a P 239 from years ago. Just got back into shooting and noticed it was shooting low from a bench stance. It currently has the 8/8 factory sights. Does anyone know what configuration to use to bring the POI up. I can't seen to find a rear 10 or a front 10. Would like to stay on the...
  17. Changing Sight Picture

    SIG Sauer Pistols
    I have a new Sig P226 TACOPs. It has the SigLite rear sites, and a Truglo front post. Here's my issue... The Sig is "aimed" for a "Combat Hold". Just to make sure are talking the same language: -- #1 Combat Hold is where the front post dot completely covers the target -- #2 Midline is...
  18. P365 sight swap????

    Just told by my SIG Elite dealer that there will be a delay getting P365s in because SIG is swapping installed sig standard nite sights for sig X-ray sights. Called SIG who confirmed swap but not any delay. What’s the story?????
  19. Help removing/replacing/adjusting SIG P229 sights

    SIG Sauer Gunsmithing
    I'm new to SIG picking up my first P229 a few days ago. I'm interested in changing the sights to XS Standard Dots. I've put XS and many other sights on Glocks before, and all I've used was a vice, punch, and a hammer (a couple of times I just used some books in lieu of a vice). Is it that simple...
  20. P-Series Sights and Loctite

    SIG Sauer Gunsmithing
    What is the consensus on using Loctite when replacing sights on P-series pistols? I have seen that Dawson recommends Red Loctite 620. I've seen others comfortable with Blue 242. Do the dovetail sights even need Loctite? If I put any at all I'm leaning towards blue bc its my first time and...