SIG Talk banner
safety
1-16 of 26 Results
  1. P250, P320, & P320 X-5, M17, M18 Pistols
    I'd love to get the XSeries Compact Small Grip Module for my M18, but it has a safety and I'm not seeing a version with cut for the stinking safety. Removing the safety isn't an option as I'd like to be able to quickly bring the M18 back to its standard Carry module (which I actually quite...
  2. P365
    Greetings All, I had a quick question for anyone with a P365/XL with a manual safety. I have approximately 1000 rounds through my XL MS with no issues so far. However, I've noticed that the manual safety has begun to loosen up quite a bit. It has a slight amount of movement in both the...
  3. Concealed Carry
    OK don't answer that out of context... ;) Is it foolish to AIWB carry a P365XL w/o a manual safety with a round chambered? (not concerned about an AD, always training to avoid an ND) Maybe it is all in my head but, I have not been rollin' with a round chambered. I have been training on...
  4. Legion Series
    I am considering the purchase of a Legion P229sao. My question regards the thumb safety. As I understand it, with a round in the chamber and the hammer cocked, if the safety is placed on "safe" the trigger is disabled. Yet there is still a live round under a cocked hammer. There must be more...
  5. P365
    I've recently started carrying my p365 after shooting it for quite a bit. Though i'm having reservations carrying it appendix after quickly examining the striker. and man is it a sweet shooter but.. It looks like the latch that contacts the sear also holds the latch for the firing pin block...
  6. Concealed Carry
    Okay, newbie question: Keep my carry 365 in a quick access safe when not on me. With thought to reducing potential for accidental discharge, it occurred to me I can easily fit my 365 in its sticky holster in the safe... Is there a good reason not to store it with one in the chamber in its...
  7. SIG Sauer Gunsmithing
    I'm brand new to this forum. A couple of forum searches didn't reveal any information on a stuck Trailside safety, so I'm looking for some collective wisdom on this one. My safety is REALLY stuck (fortunately in the fire position). I've looked at the mechanism and studied the parts diagrams...
  8. P238, P938 Pistol
    Just got my P938 working great only to fine a new issue. First of all the safety is torture to the base of my left thumb (I shoot left-handed). Worse though is that maybe once every 50 rounds the recoil will cause the safety to self-engage. Guess I could probably swap it to a righty and use...
  9. Legion Series
    This was a weird one I thought I'd share. Like for my P938 Nitron, I procured the Galloway Hammer Spring to install on my new P938 Legion. It was an easy upgrade designed to lighten the trigger by about a pound or so. No issues when I did it myself last time ... Disclaimer: I'm not a...
  10. Gun Gear
    Hello Everyone, Recently purchased a Sig P229 and looking for suggestions regarding safe storage at home. I've looked at countless gun safes, mechanical, biometric...etc. I have a special needs child at home and I simply DO NOT trust any of the safes I've seen online for the following...
  11. SIG Sauer Rifles
    Hi All, I am installing a new Geissele MCX trigger in a first gen MCX lower. While I was removing the safety components I heard a "clink" on the floor. I was surprised because I thought all parts were accounted for before this step (detents, springs, etc.,.). I looked down to find a small...
  12. P250, P320, & P320 X-5, M17, M18 Pistols
    What the heck is a mechanical disconnect? I've tried looking up details about anything to do with it and I'm coming up short. I was hoping someone here could shed some light. Thanks for your replies.
  13. P250, P320, & P320 X-5, M17, M18 Pistols
    Taking down my p320 compact is all well and good. That is, until I attempt to reassemble the pistol. When putting the slide back on the rails I need to hold the safety lever in the downward position until the slide's back plate is passed it. If I don't hold the safety lever down it interferes...
  14. SIG Sauer Gunsmithing
    P938 - Safety engagement issues after trigger swap *Video Added* I replaced the trigger on my P938 (manufactured 4/16) with a W Engineering anodized aluminum trigger. I can't recall whether the pistol had this issue before the replacement (I had only shot it once), but now I can't engage the...
  15. P238, P938 Pistol
    I am disappointed with the force required to put the safety into the safe position on my own p238 and in general the p238 p938 design in general. It is not an issue with my personal firearm since I have tested other ones at gun shops etc. While this might not be much of an issue in a real self...
  16. SIG Sauer Rifles
    Hi everyone, i'm new on this forum and i hope my first post is not too stupid…;) I just purchased a new timney trigger for my rifle and disassembled the old trigger. But here's the point: I don't know how to get the safety pin out!!!! This drives me crazy, i just couldn't find anything on the...
1-16 of 26 Results
Top