SIG Talk banner
problem
1-15 of 15 Results
  1. P365
    Hey everyone! I have a Sig P365X and I had recently installed a manual safety with the X grip module. I put everything back together and function checked - everything seemed alright. I then went to field strip the handgun by doing the following: 1) Check clear of ammo. 2) Lock slide to rear...
  2. P365
    I got a new P365 the other day and when I got home immediately noticed an issue (I know I should have tested at the store). Build: January 2021 Right out of the box I tested the trigger reset and noticed the slide will not rack while I have the trigger held. I’ve never heard of such a thing. I...
  3. P250, P320, & P320 X-5, M17, M18 Pistols
    My P320 M17 had around 1000+ rounds now, and every 100 rounds or so after the initial 1000 rounds, the screw that tightens the sight plate will have to be re-tightened. To solve this, apply a little threadlocker to the two screws that holds the sights.(BLUE strength, if you get red they might...
  4. Legion Series
    After owning a lot of middle of the line handguns in the $500 dollar range I decided I wanted to start getting into the more premium handguns. In the $1000+ range there is a lot to choose from that all compete with the legion series. I decided to purchase a legion because it had many of the...
  5. P250, P320, & P320 X-5, M17, M18 Pistols
    I recently just bought a P320 X5 and have already put about 500 rounds through it. I love everything about the gun until at a local match someone else who had the X5 had the rear sight pin start to fall out from the recoil of the gun. I thought it was an isolated occurrence until mine started to...
  6. SIG Sauer Pistols
    Hi there, I'm very upset today when I took my brand new Sig P226 MK25 to the range to find out this problem: after the last shot in the magazine, the gun won't pop open and lock back most of the times. I thought that might be my grip somehow caused it first, so I asked the range guy to try to...
  7. SIG Sauer Gunsmithing
    Please excuse me if I posted this in the wrong area as I'm not sure exactly where to put this one... I've got a few ACP kits and have tried a few different firearms with it. This kit allows a handgun to be inserted into a chassis similar to a Roni or KPOS type offering. The first gun I tried...
  8. SIG 1911 Pistols
    Good morning everyting. I live in Italy and sorry for my rusty english! I have bought a new SigSauer 1911 Traditional Dual Tone 45ACP. After about 200 rounds i have a problem. After the last round in the magazine the gun don't remain open. I find a video on youtube that explain my problem. If...
  9. P250, P320, & P320 X-5, M17, M18 Pistols
    Most of the cheap ammo out that chain stores sell is from overseas. How's it run in the P320 for plinking; will it not reset the striker/jam it? So does the P320 need ammo better than the under $10 variety? A couple of the guns I have are the Beretta 92FS 9mm and the Sig P238. I put anything...
  10. SIG Sauer Pistols
    I've got both a 9MM and a 40 P239 and both guns now are failing to lock the slide back after the last round. I've got several magazines for each, the ones originally purchased with the guns, and some bought afterwards. Makes no difference which mags are in the gun(s), the slide fails to lock...
  11. SIG Sauer Pistols
    I'm looking for some help. I went to the range today to zero the Laser on my P-227. I ran about 50 rounds of Buffalo 230gr FMJ doing that and practicing. On my last shot, the slide jammed open and will not return to battery. I removed the mag and tried to actuate the slide lock. The mag came...
  12. P250, P320, & P320 X-5, M17, M18 Pistols
    Hey SIG Talk, I'm new to this forum and SIG firearms in general! I just purchased a new P320 Carry and I tried out the dry fire at the shop and the trigger break seemed great. After taking it home, disassembling it and re-assembling I noticed that when I go to dry fire it, the trigger seems to...
  13. SIG Sauer Pistols
    Last week I bought a new sig TACOPs .45 ACP 1911. I disassembled it (there was resistance when I took the slide off the frame) and cleaned it. When I reassembled it I could not get the slide to completly fit back onto the frame (left about ¾ of an inch of the frame showing). The plunger lever...
  14. SIG Sauer Pistols
    I just picked up a brand new 1911 Stainless Rail after finding a dealer an hour away from my house with one. Brought it home to clean it and re-oil it with some MPro7. I had watched many videos on proper teardown already. Had some difficulty taking the slide off, but eventually got it. Cleaned...
  15. SIG Sauer Rifles
    Just purchased a SIG516 gen 2 in FDE, and I really want to love this rifle. Problem is that I have fired 300 rounds so far on two separate occasions, and with every magazine there have been issues. Issues: 1.) Rifle will not cycle the next round 2.) Bolt does not lock back after last round...
1-15 of 15 Results
Top