SIG Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 33 Results
  1. P250, P320, P320 X-5, M17, & M18 Pistols
    Hey everyone, I have a P320 M17 that I’m going to be running with the Bobro RMR plate with the integrated rear sight. Is there a consensus on which brand front sight works best with it? The website recommends a front sight with a nominal height of 0.375". Would the front sight from this...
  2. P250, P320, P320 X-5, M17, & M18 Pistols
    Upon reassembly the slide and td lever became stuck as you can see in the photos. I have tried almost everything i’ve seen in forums and the darn lever just won’t move. The slide will not go forward at all and goes backwards a tiny bit but not much at all. When I pull the slide back it jerks the...
  3. P250, P320, P320 X-5, M17, & M18 Pistols
    Mounted a holosun 407k on my m18. Screw pattern is correct (leupold/shield). Screws are correct . Optic is a bit short and rear sight holes are exposed. Not quite enough clearance to get the factory rear sight behind it. With no baseplate the notch on the rear of optic matches factory sight...
  4. P250, P320, P320 X-5, M17, & M18 Pistols
    I have a M17 with Wilson Combat frame and Romeo 1 Pro, I want to buy a front sight that would co-witness lower 1/3 with the built in sight on the Romeo 1 Pro, what size front sight should I buy? 6? 8? I like the XRay3 Super Tall sights but only need the front one as the optic takes away the...
  5. P250, P320, P320 X-5, M17, & M18 Pistols
    I have a M17 w/ Manual Safety, Sig Flat Faced Trigger, and Wilson Combat frame. Can I put the Apex Trigger Bar on the Sig Flat Faced Trigger? Or do I have to use the Apex Trigger? I really like the Flat Faced Trigger from Sig and would prefer to keep it if possible but as everyone knows the M17...
  6. P250, P320, P320 X-5, M17, & M18 Pistols
    Hey y'all, I've been running an RMR on a Bobro plate on my M17 for about 4 months and ~3000 rounds. Every 2-300 rounds I need to clean my lense because it's rendered useless by the carbon build up from the LCI. Super annoying, and getting to the point I'm considering moving platforms. Anyone...
  7. P250, P320, P320 X-5, M17, & M18 Pistols
    Recently bought a Sig M17 from a local dealer here in Upstate NY as I've been trying to complete my collection of pistols from the trials and the M17 was the last piece. The NY "compliant" models haven't been in stock here for a long time so the first one I saw I grabbed it (Now there...
  8. P250, P320, P320 X-5, M17, & M18 Pistols
    Looking for some advice on the best IWB/Concealed Carry holster for my m17. Ideally I may be participating in some of the local IDPA competitions with this pistol and would like something suitable for that as well. Thanks in advance!
  9. P250, P320, P320 X-5, M17, & M18 Pistols
    Hello to the group! I currently own a Smith M&P9 1.0. I like it, but I'm getting the itch for something different. I saw the M-17 online and fell in love with it. I then rented a P-320 Compact at the local range, and I shot VERY well indeed with it. Unfortunately, there are seemingly no ranges...
  10. P250, P320, P320 X-5, M17, & M18 Pistols
    On the upside the zero is good and my controlled pairs are much faster/more effective. But as expected I'm gonna have to tune the recoil since it's failing to eject about 1 out of every 12-15 rounds using standard Blazer 124g FMJ range ammo. My carry rounds are Sig 124g JHP and I assume that...
  11. P250, P320, P320 X-5, M17, & M18 Pistols
    I am good friends with the owner of one the areas best gun stores and custom shop. I went by Friday to pick up a few pistols and spend my credit. When what did my eyes behold, his prototype MAXG. This one was setup for the M17, but works for the M18 as well. As you can see he married an AXG...
  12. P250, P320, P320 X-5, M17, & M18 Pistols
    So I wanted to build a gun that had the looks of the agency arms and PMM full sized guns, without breaking the bank. What I came up with was a compromise between function and features. Total cost: 995$ us dollars. P320 subcompact slide Sig threaded barrel 4.3 inch full sized X5 sig grip...
  13. New Member Introductions
    Hello, Just joined from “The People’s Republic of Massachusetts”. I’ve actually perused the forums looking for info in the past and I really like the respect shown among the people in the forums, so I decided to join. I love my SIGs, my very first pistol was a 365 and I loved it. I’ve traded it...
  14. P250, P320, P320 X-5, M17, & M18 Pistols
    Hello everyone, I’m new to the group so I first would like to introduce myself. My names Jeremy! Bought my first Sig about a year ago (P320 subcompact), and I’ve recently bought theP365XL. I love them both, and am loving this Sig community. My question is this: I’ve been looking in to...
  15. SIG Sauer Pistols
    I saw a steadily climbing local gunbroker auction for a P220, and bet $400 on a whim, and won the auction! After taking possession of the pistol, I put it against my USP 45, and the P220 swept it away. Better balance and feel in the hand, smoother/less recoil, and more accurate shooting for me...
  16. P250, P320, P320 X-5, M17, & M18 Pistols
    After years of avoiding pistols, I finally started investing in a few this past July and have made my share of investment mistakes. Due to the handgun shortage, I jumped on the chance to get a M18 because I thought it was cool and because not much else I was interested in was available. I...
  17. P250, P320, P320 X-5, M17, & M18 Pistols
    So I read the posts I could find on the forum, saw that the two screws are SAE 3/32 Allen, applied a little heat for the loctite from the factory, and.... may have a stripped the screws... I didn't try to continue forcing the issue repeatedly, but I felt some slipping (though with how small the...
  18. P250, P320, P320 X-5, M17, & M18 Pistols
    Would you buy a NIB M17 commemorative for $1600? And if you did would you fire it? New gun owner here and a huge fan of Sigs. I want the M17 commemorative bad...
    m17
  19. Ammo and Reloading
    My friend has the M17 (I just got the M18). He's blown 2 extractors in the M17 using his reloads using Titegroup and Bullseye. I don't recall what the powder charges were but I know they were not excessive and within spec. The same rounds worked perfectly in his Glock 19. When we looked at...
1-19 of 33 Results
Top