SIG Talk banner


  1. P229 Legion FTE - Sig Fixed - one week turnaround

    SIG Sauer Pistols
    My 2016 P229 Legion 9mm da/sa just started giving me failures to extract after 1950 perfect rounds. I emailed Ryan Gagneux, who was identified in earlier threads as Sig's Legion support guy. Great response. He asked a question or two and then arranged for me to send the gun for repair. I had...
  2. P229 Stainless Elite FTExtract Issues (Been repaired once)

    SIG Sauer Pistols
    Hi All, A little back story info. Got this gun in 2016 and didn't shoot it much. Decided to dust it off and take it out a few weeks ago. Shot some WWB 9mm through it, and was getting FTE's left and right. I call up Sig, they said to send it back. They replaced the extractor, and recoil spring...
  3. P365 FTE- but only with Sig Ammo

    Hi all- I'm new to sigtalk- finally got my p365 with manual safety (thank you Massachusetts!) and I've been enjoying and learning from you all. I've been to the range with my p365 four times and, until today, have only used Blazer 9 mm. Blazer is the same brand of practice ammo that I use in my...
  4. P210A Extraction Problem

    With almost every magazine, I am having FTE issues. For the most part, the empty cartridges are sticking in the barrel, though a few have stove-piped. As I have Googled FTE’s with any gun, there seem to be three general solutions... try a different round (which I did yesterday - and it didn’t...
  5. Sig P320c: FTE and Sig Customer Service Issue

    P250, P320, & P320 X-5 Pistols
    Hey all, I posted several weeks ago regarding a FTE issue I had with my NIB Sig P320c. I'll tell the story again and give you an update with my current issue. I purchased a P320c from my local gun shop and range at the beginning of December. After I took possession of the pistol I went to the...
  6. Factory New P320 - Factory Defect

    P250, P320, & P320 X-5 Pistols
    Hi All - I purchased a new P320 9MM and took it to the range. I had two FTE malfunctions shooting through my first 50 rounds, I used Blazer range ammo I purchased from my local gun shop and range. I didn't clean and lube the gun so I figured, based on some comments I read in this forum, that was...
  7. Utterly baffling issues with trusty sig pro sp2340. Any ideas?

    SIG Sauer Pistols
    First of all, great forum you got here. Not sure how I missed this place when I tried unsuccessfully a dozen times to register at sigforum but I think I'll stay awhile. Hopefully you can shine some light on this for me as i'm fairly ocd about my guns being in good working order. Abridged...
  8. P229 Elite Stainless - Failure to Eject

    SIG Sauer Pistols
    I mentioned the FTE in the Sig Photos thread, but figured I'd start my own thread for the actual issue. This photo is in the exact state following a jam. Unfortunately, lighting in the range isn't the best for photography. You can see that the spent casing was only partially extracted. The...
  9. P220 Failure to Extract

    SIG Sauer Pistols
    I'm new to the sig forum but I am a long time sig owner. If own a p220 built in 1993. I am the original owner and I've put only about 4k rounds through this. I purchased some cheep ammo recently and has issues with FTE. Since it was due to have a rebuild and pro cleaning anyway, I just sent...
  10. New to Forum, New P238, FTE & FFF Problems

    P238, P938 Pistol
    I am a new forum member and a new Sig P238 owner. The ammo shortage has been frustrating because I have been able to find ammo, but I have not been able to find any that will reliably work through this new gun. I have put over 250 rounds of various FMJ(can't find any personal defense ammo) and...
  11. Sig Sauer M11-A1 Extraction Problem

    SIG Sauer Pistols
    Howdy so Sig's new M11-A1 is my first Sig purchase. I want to love this gun. I don't mind the hype about it being a 228 or 229, In my opinion it is an upgraded gun made from better materials. However besides that point, I have had a little trouble with the extraction of a few rounds.. Heres the...
  12. p226 FTE advise

    SIG Sauer Pistols
    Hello I have encountered a persistent issue FTE issue with my p226 and your input would be highly appreciated. I checked for this matter this and other forums, but didn’t see a particular solution. If however I missed such thread and you are aware of it please let me know. 1) after firing, the...
  13. SP2022 FTE issues

    SIG Sauer Pistols
    I have had 10 FTE with Remington UMC ball ammo. Is anyone having issues with FTE with the SP2022? Thanks
  14. New SP 2022 owner

    New Member Introductions
    Took it to the range yesterday and shot 100 rounds of Remington 9mm 115gr. Two FTE out of 100 round. Will fire another 100 rounds or more and then test some CCW loads. Upstate New York is getting cold. Hoping for 1 or 2 more warmer day. IDAP starts in April:D