SIG Talk banner

Forum Discussions about this Product

1 - 2 of 2 Posts
    1. · Registered
      Joined
      ·
      354 Posts
      If you have to get a kit, Otis makes a nice one. But, I found that you are better off making your own kit.

      1) Bore Snake to clean out the carbon out of the barrel

      2) Tipton Deluxe Carbon Fiber 12" cleaning Rod -Twists the cleaning patch as you push it through the barrel. Super smooth, nice quality and worth the money.
      Tipton Deluxe 1-Piece Cleaning Rod Carbon Fiber Thread

      3) Brass Tips Any Brand
      Tipton Slotted Tip Set 4-Piece 8 x 32 Male Thread Brass

      4) Southern Bloomer Cotton Cleaning Patches Southern Bloomer Cotton Cleaning Patches

      5) Lots of Qtips and pipe cleaners for the really hard to reach areas.
      Amazon.com - BJ Long's~ BJ Long's Pipe Cleaners~ Hard Bristole~ 3 Pack~ 44 Cleaners per Roll -

      6) Microfiber Rags - Costco

      7) Prolix Gun Cleaner - Won't harm your finishes and takes off carbon residue from slide, barrel and inside the frame. Apply and remove with Qtips. PrOlix Lubricants Home Page

      8) Remington 40 X Bore Cleaner - For the stubborn heavy carbon deposits on the breach face and the extractor. Also apply with Qtips. I also use this for the barrel after the initial cleaning with Prolix.
      http://www.amazon.com/gp/product/B0000D94RU/ref=s9_simh_gw_p200_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=06F777N8VHPDM3J7RFEP&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846

      9) Wilson Combat Oil and Grease - I use the oil for springs, decocker and takedown lever. I use the grease on the barrel, the slide area where the barrel rests, and on the frame and slide rails for storage.
      http://www.amazon.com/gp/product/B0000D94RU/ref=s9_simh_gw_p200_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=06F777N8VHPDM3J7RFEP&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846

      Wilson Combat Ultima-Lube II Gun Grease Liquid

      10) Shooter's Choice or Slide Glide - I apply either Shooter's Choice or Slide Glide to the slide and frame rails before shooting at the range.

      Shooter's Choice All Weather High-Tech Gun Grease 10cc Syringe

      http://www.amazon.com/Slide-Glide-Lite-Slide-Glide-Tube/dp/B0032Z4R7M/ref=sr_1_11?ie=UTF8&qid=1401999084&sr=8-11&keywords=slide+glide+tube

      11) Nitrile Gloves - http://www.amazon.com/gp/product/B000FPKR3K/ref=oh_details_o00_s00_i02?ie=UTF8&psc=1

      12) Respirator - http://www.amazon.com/gp/product/B00063Y25U/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1

      13) DLead Soap
      http://www.amazon.com/gp/product/B009P9WYSI/ref=oh_details_o00_s00_i03?ie=UTF8&psc=1
      http://www.amazon.com/gp/product/B009PA6WP8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
       
    2. · Registered
      Joined
      ·
      34 Posts
      Discussion Starter · #13 ·
      If you have to get a kit, Otis makes a nice one. But, I found that you are better off making your own kit.

      1) Bore Snake to clean out the carbon out of the barrel

      2) Tipton Deluxe Carbon Fiber 12" cleaning Rod -Twists the cleaning patch as you push it through the barrel. Super smooth, nice quality and worth the money.
      Tipton Deluxe 1-Piece Cleaning Rod Carbon Fiber Thread

      3) Brass Tips Any Brand
      Tipton Slotted Tip Set 4-Piece 8 x 32 Male Thread Brass

      4) Southern Bloomer Cotton Cleaning Patches Southern Bloomer Cotton Cleaning Patches

      5) Lots of Qtips and pipe cleaners for the really hard to reach areas.
      Amazon.com - BJ Long's~ BJ Long's Pipe Cleaners~ Hard Bristole~ 3 Pack~ 44 Cleaners per Roll -

      6) Microfiber Rags - Costco

      7) Prolix Gun Cleaner - Won't harm your finishes and takes off carbon residue from slide, barrel and inside the frame. Apply and remove with Qtips. PrOlix Lubricants Home Page

      8) Remington 40 X Bore Cleaner - For the stubborn heavy carbon deposits on the breach face and the extractor. Also apply with Qtips. I also use this for the barrel after the initial cleaning with Prolix.
      Amazon.com : Remington 40-X Bore Cleaner bottle (4-Ounce) : Hunting Cleaning And Maintenance Products : Sports & Outdoors

      9) Wilson Combat Oil and Grease - I use the oil for springs, decocker and takedown lever. I use the grease on the barrel, the slide area where the barrel rests, and on the frame and slide rails for storage.
      Amazon.com : Remington 40-X Bore Cleaner bottle (4-Ounce) : Hunting Cleaning And Maintenance Products : Sports & Outdoors

      Wilson Combat Ultima-Lube II Gun Grease Liquid

      10) Shooter's Choice or Slide Glide - I apply either Shooter's Choice or Slide Glide to the slide and frame rails before shooting at the range.

      Shooter's Choice All Weather High-Tech Gun Grease 10cc Syringe

      Amazon.com : Slide-Glide Lite, Tube : Other Products : Everything Else

      11) Nitrile Gloves - Microflex MF300L Powder Free Diamond Grip Latex Gloves Size Large (100 per Box): Industrial Disposable Gloves: Amazon.com: Industrial & Scientific

      12) Respirator - 3M Tekk Protection Mold and Lead Particle Respirator, Medium - Papr Safety Respirators - Amazon.com

      13) DLead Soap
      Amazon.com: D-Lead Hand Soap - 8oz: Industrial & Scientific
      Amazon.com: D-Lead Abrasive Hand Soap - 16oz: Industrial & Scientific

      Thanks man I really appreciate you taking the time to post all that
       
1 - 2 of 2 Posts

Forum Reviews

Be the first to review this product

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Sign in to add review

Top