SIG Talk banner

Forum Discussions about this Product

1 - 10 of 11 Posts
    1. · Premium Member
      Joined
      ·
      775 Posts
    2. · Registered
      Joined
      ·
      1,278 Posts
      As for the magazines, The 10 round mag wil not fit the P365XL module but any 12 round mag will fit if you install a flat mag base late. MGW and Sig have them on their sites.

      Sig Sauer P365 Magazine Floorplate, 9mm 12 Round, Flush

      12 RD P365XL FLUSH FIT FLOOR PLATE
      I recently bought several 12-round Sig-branded magazines thru Proven Outfitters & Osage County Guns - they ALL came with both floorplates, so will work with the P365 or the P365xl.
      Osage had the best price at $39.95 ea. (BTW: Excellent service from them - 4 days between order and receipt.)
       
    1. · Banned
      Joined
      ·
      628 Posts
      12 rd Flush Fit Floorplate for P365XL:

      Sig sells them at MSRP, but you can usually find them cheaper elsewhere. MGW has them in stock

      Here is an aftermarket floorplate with a very short extension:
      Base plate for use with the P365XL and 12 round magazines:

      Here is an aftermarket extended floorplate:
      Pinky Extension for use with the P365XL and 12 round magazines:
       
    1. · Banned
      Joined
      ·
      628 Posts
      I then just take the 365 12 round magazines (3) that came in the Tacpac, remove the extended base thingy, replace the base plate and I'm good to go?
      Incorrect. A 2-piece extension and floorplate is used with the 12rd magazine to fit a P365. A one piece floorplate is used with the 12rd magazine to fit a P365XL. The floorplates are physically different and are NOT directly interchangeable.

      From what I've read here the new mags have a base plate that will fit either the XL or standard grip. Hope I'm correct??
      The retail package for the P365-P365XL magazine comes with the 2-piece extension and floorplate for the 12 rd magazine to to fit the P365 AND also includes a seperate one piece flooplate to make the 12 rd magazine fit the P365XL.

      It is possible to cut the back of the P365 floorplate so that it will fit into the P365XL magazine well. HOWEVER, the retention to the bottom of the magazine is not as good and I would NOT advise modifying the floorplate that way

      You will need to buy this floorplate to convert a 12rd magazine from your P365 Tac Pac to fit the XL grip module: 12 RD P365X and P365XL FLUSH FIT FLOOR PLATE

      You can NEVER have too many magazines! I won't say how many magazines I have, but it's more than the 3 that came with my Tac Pac. Extra magazines allow you to keep defensive rounds loaded while you use the extra magazines when you go target shooting with FMJ ammunition.
       
    1. · Registered
      Joined
      ·
      431 Posts
      Discussion Starter · #1 ·
      I can't find these in stock anywhere at the moment. Perhaps, you see them or have some that came with some 12 round mags that you don't need.

      I need the baseplates (flush fit) that will allow the 12 round mags to work in the XL grip module. I'm switching to that frame from the normal grip.

       
    1. · Premium Member
      Joined
      ·
      3,087 Posts
      Not according to Sig...
      Per Sig's Website:
      Replace your P365 15-round magazine floor plate
      15 RD P365 FLOOR PLATE

      They have been called Baseplates, Floorplates and probably some other things too.
      I never can keep them straight. LOL

      Maybe it's a name that we made up..
      Here is Sig listing for the 12 round XL Flush Baseplate / Floor Plate
      Who knows..as long as we all know what is meant.

      12 RD P365X and P365XL FLUSH FIT FLOOR PLATE
       
    1. · Registered
      Joined
      ·
      1,915 Posts
      Thank goodness I live in Michigan. What do I need to change the base pad to? I have those extended ones on my 10 round to make them 12 round.( MagGuts). Will those work?
      The standard 10 round magazine will not work in the XL. If you have 12 round extended magazine for the standard P365, those can be changed to work in the P365XL, or X. You need to change out the mag base floor plate. You can purchase them from Sig.

       
    2. · Registered
      Joined
      ·
      1,213 Posts
      Discussion Starter · #6 ·
      The standard 10 round magazine will not work in the XL. If you have 12 round extended magazine for the standard P365, those can be changed to work in the P365XL, or X. You need to change out the mag base floor plate. You can purchase them from Sig.

      So the MagGuts won't work. Bummer
       
1 - 10 of 11 Posts

Forum Reviews

Be the first to review this product

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Sign in to add review

Top